General Engineering Plastics

Product Details:

Its a engineering plastic material with base material PA6/ nylon PA6 . 

Additional Information:

• Delivery Time: within 3-4 weeks

Product Details:

Metapom H-TF (Polyoxymethylene POM-H) is a PTFE-filled Homopolymer that offers enhanced wear resistance over other acetal grades, a lower coefficient of friction, great wear performance in wet environments, and low moisture absorption. 

Product Details:

Metapom (Polyoxymethylene POM-H)  is a homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness, and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades.

Product Details:

Metapom (Polyoxymethylene POM-C) is a general purpose, copolymer acetal grade that is often favored for its porosity free nature. Metapom shapes also offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.

Product Details:

Additional Information:

• Delivery Time: Normally Ex-Stoc/ 3 to 4 weeks, however to be confirmed at the time of order.

Product Details:

Metapom (Polyoxymethylene POM-C) is a general purpose, copolymer acetal grade that is often favored for its porosity free nature. Metapom shapes also offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.

Product Details:

Metapom H-TF (Polyoxymethylene POM-H) is a PTFE-filled Homopolymer that offers enhanced wear resistance over other acetal grades, a lower coefficient of friction, great wear performance in wet environments, and low moisture absorption. 

Product Details:

Its a engineering plastic material with PA6+ wax filled , for High load sliding applications..

Product Details:

Its a engineering plastic material with PA6+ MOS2 , for High load applications.

Product Details:

Its a engineering plastic material with PA6+ wax filled , for High load sliding applications..

Product Details:

Metalene 1000 Ultra High Molecular Weight Polyethylene UHMW-PE shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface and excellent impact strength

Product Details:

Metalene 1000 Ultra High Molecular Weight Polyethylene UHMW-PE shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface and excellent impact strength

Product Details:

PC 1000 Clear Translucent (Polycarbonate) machine grade polycarbonate (PC) is a transparent amorphous thermoplastic which offers very high impact strength and high modulus of elasticity. The material has a 290°F (145°C) heat deflection temperature at 264 psi, absorbs very little moisture and resists acidic solutions. These properties, in addition to good electrical characteristics, make PC 1000 machine grade polycarbonate stock shapes an excellent choice for electrical/electronic applications (See Figures 12 and 13). Its strength, impact resistance and transparency also make it an ideal material for certain transparent structural applications such as sight glasses and windows.

PC 1000 machine grade polycarbonate is stress relieved making it ideal for close tolerance machined parts. Our stock shapes are produced from polycarbonate resins which meet the requirements of ASTM D 3935.

Product Details:

TIVAR® ESD Ultra High Molecular Weight Polyethylene UHMW-PE / TIVAR® 1000 Antistatic Ultra High Molecular Weight Polyethylene UHMW-PE electro static dissipative, carbon-filled shapes protect against electrical charge build-up on wear surfaces.

Product Details:

Ertalon 4.6 features a better retention of stiffness and creep resistance over a wide range of temperature. 

Product Details:

Ertalon 4.6 features a better retention of stiffness and creep resistance over a wide range of temperature.

Product Details:

TIVAR® H.O.T (Higher Operating Temperature) Ultra High Molecular Weight Polyethylene UHMW-PE shapes, are formulated to maintain key performance properties in an extended temperature range. For this reason, this TIVAR® grade excels in a variety of industrial manufacturing environments where temperatures reach up to 230°F / 110°C. TIVAR® H.O.T

Product Details:

Nylatron® 703 XL Polyamide PA6 is a unique, ultra-high performance bearing grade that offers even better wear resistance than Nylatron® NSM, with superior load bearing capabilities and a near zero level of stick-slip. 

Product Details:

Acetron® Polyoxymethylene POM-H / Ertacetal® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness, and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades

Product Details:

Advance engineering Plastic grade with 30% carbon fibre, used for the application high temperature and pressure 

Product Details:

TIVAR® 88-2 Ultra High Molecular Weight Polyethylene UHMW-PE UV stabilized shapes offer the lowest coefficient of friction of all TIVAR® 88 grades. As a premium lubricant-filled grade that offers low moisture absorption, and excellent chemical resistance, TIVAR® 88-2 UHMW-PE components can be fabricated and welded for any application that requires a seamless drop-in liner, a framed-in liner, or a replacement liner.

Product Details:

Quicksilver® Ultra High Molecular Weight Polyethylene UHMW-PE seamless dump body liners protect the integrity of original truck beds, by providing a steady release of viscous materials such as hot asphalt, clay, coal, fly ash, gravel, gypsum, limestone, salt, sand, sludge, and topsoil, which ultimately reduces downtime, extends wear life, and eliminates the need for costly flow agents

Product Details:

TIVAR® DrySlide Ultra High Molecular Weight Polyethylene UHMW-PE is an internal lubricated product. Thanks to this lubricant which is built into the PE-UHMW matrix with higher molecular weight, TIVAR® DrySlide UHMW-PE offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW.

Product Details:

TIVAR® SuperPlus UHMW-PE is a wear optimised, partially cross-linked UHMW-PE material with extremely high degree of polymerisation for use in most demanding applications and environments. When used for drainage elements in paper machinery, this TIVAR® grade generally also offers better wear and sliding performance than TIVAR® Ceram P UHMW-PE .

Product Details:

Advance engineering Plastic grade with 30% glass filled, used for the application high temperature and pressure